Blog Articles  Resources | About Us  | Order Status  | Pay Invoice
Contact Us
  • There are no suggestions because the search field is empty.

A Sticky Trick for All-Over Printing

Posted by Jake Saunders on August 24, 2011 8:15:00 AM CDT

In order to print over an entire t-shirt, the inside of the garment must be starched. This is the main difference between the basic screen print process and the process of all-over printing.

Starching is the action of spraying a starch-like mist to the inside of a t-shirt.

The purpose of starching a garment is to keep the insides of the shirt together during the printing stage of production. During production, each screen allows ink to be passed through onto the garment. When the screen is lifted, it is extremely important that the shirt remains flat and in place. If the shirt is moved or altered in any way, the print registration will not be consistent from screen to screen. Also, if the shirt lifts somewhat due to the screen pulling away, it can cause a wrinkle, which in result will cause a misprint since the ink will not be distributed smoothly onto the garment.

Basic screen printing does not require the same starching process since the shirts are pulled over the pallet. Instead, the pallet is applied with an adhesive spray to provide the same effect. When the shirt is pulled over the pallet. one side of the shirt is held in place by the starched pallet.

BASIC SCREEN PRINT

You can see the shirt is being held in place by the adhesive spray on the pallet and the insides of the shirt are not sticking together.


ALL-OVER SCREEN PRINT

Since the entire shirt needs to be exposed to the screen, the shirt is starched to keep flat as the screen lifts off the garment. Instead of pulling the shirt over the pallet, it is placed directly on it.


Though the starch used by most decorating manufacturers is non-toxic, all decorated garments should be washed before being worn.

Jake Saunders

Written by Jake Saunders